Satellite radio RF test

Satellite radio RF testing and diagnostic functions. More...

Enumerations
enum	RFTestTxType { TX_TYPE_TONE = 0 , TX_TYPE_PRBS }
	RF test Tx type. More...

Functions
MYRIOTA_HARDWARE_API int	RFTestTxStart (uint32_t Frequency, uint8_t TxType, bool IsBurst)
	Start the RF Tx test.
MYRIOTA_HARDWARE_API void	RFTestTxStop (void)
	Stop the RF Tx test.
MYRIOTA_HARDWARE_API int	RFTestRxStart (uint32_t Frequency)
	Start the RF Rx test.
MYRIOTA_HARDWARE_API int	RFTestRxRSSI (int32_t *RSSI)
	Get current RSSI from radio receiver.
MYRIOTA_HARDWARE_API void	RFTestRxStop (void)
	Stop the RF Rx test.

Detailed Description

Satellite radio RF testing and diagnostic functions.

Enumeration Type Documentation

RFTestTxType

enum RFTestTxType

RF test Tx type.

Enumerator
TX_TYPE_TONE	Transmit tone, i.e. CW.
TX_TYPE_PRBS	Transmit pseudorandom binary sequence.

Function Documentation

RFTestTxStart()

MYRIOTA_HARDWARE_API int RFTestTxStart	(	uint32_t	Frequency,
		uint8_t	TxType,
		bool	IsBurst
	)

Start the RF Tx test.

The default LED is on when transmitting. The antenna port should be connected to a load when testing. When testing in burst mode, the radio is on for 260ms and off for 1740ms. Otherwise the radio transmits continuously.

Parameters

Frequency	The frequency in Hertz.
TxType	The type of transmission, either tone or pseudorandom binary sequence defined by RFTestTxType.
IsBurst	Whether to transmit in burst mode.

Returns

0 if succeeded, -1 if failed.

RFTestTxStop()

MYRIOTA_HARDWARE_API void RFTestTxStop

(

void

)

Stop the RF Tx test.

Terminates RF transmission and returns the radio to idle state.

See also

RFTestTxStart()

RFTestRxStart()

MYRIOTA_HARDWARE_API int RFTestRxStart

(

uint32_t

Frequency

)

Start the RF Rx test.

Parameters

Frequency

The frequency in Hertz.

Returns

0 if succeeded, -1 if failed.

RFTestRxRSSI()

MYRIOTA_HARDWARE_API int RFTestRxRSSI

(

int32_t *

RSSI

)

Get current RSSI from radio receiver.

Parameters

RSSI[out]

Pointer to an integer to store the RSSI value in dBm.

Returns

0 if succeeded, -1 if failed.

RFTestRxStop()

MYRIOTA_HARDWARE_API void RFTestRxStop

(

void

)

Stop the RF Rx test.

Terminates RF reception and returns the radio to idle state.

See also

RFTestRxStart()