Pulse Counter for counting pulses on an input while the Module is in sleep mode. More...

Enumerations
enum	PulseCounterOption { PCNT_DEFAULT_OPTIONS = 0 , PCNT_EDGE_FALLING = 1 << 0 , PCNT_DEBOUNCE_DISABLE = 1 << 1 , PCNT_PULL_UP = 1 << 2 }
	Pulse counter bit-wise options. More...

Functions
MYRIOTA_HARDWARE_API int	PulseCounterInit (uint32_t Limit, uint32_t Options)
	Initialise the pulse counter and configure the event generation logic.

MYRIOTA_HARDWARE_API uint64_t	PulseCounterGet (void)
	Get the total count of the pulse counter.

MYRIOTA_HARDWARE_API void	PulseCounterDeinit (void)
	Deinitialise the pulse counter.

Detailed Description

Pulse Counter for counting pulses on an input while the Module is in sleep mode.

Enumeration Type Documentation

Pulse counter bit-wise options.

Enumerator
PCNT_DEFAULT_OPTIONS	Count on rising edge.
PCNT_EDGE_FALLING	Count on falling edge.
PCNT_DEBOUNCE_DISABLE	Disable hardware debouncing, default enabled for about 160us.
PCNT_PULL_UP	Enable pull-up, default pull-down.

MYRIOTA_HARDWARE_API int PulseCounterInit	(	uint32_t	Limit,
		uint32_t	Options
	)

Initialise the pulse counter and configure the event generation logic.

Event is generated when pulse count hits multiple of Limit.

Parameters

Limit	The pulse count limit for event generation. Can be set to 0 to 256, or multiple of 256. Set Limit to 0 to disable event generation.
Options	Used to configure the pulse counter. See PulseCounterOption for available options.

MYRIOTA_HARDWARE_API uint64_t PulseCounterGet ( void )

Get the total count of the pulse counter.